On Mon, 2 Jan 2012, andy pugh wrote: > Date: Mon, 2 Jan 2012 16:01:43 +0000 > From: andy pugh <bodge...@gmail.com> > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Subject: Re: [Emc-users] Surface-Mount > > On 2 January 2012 15:46, Peter C. Wallace <p...@mesanet.com> wrote: > >> A hair dryer is close but a little too cool. A hot air gun (the type used >> with >> heat-shrink tubing) will work. > > OK, one has been on my "to-buy" list for a while, but so far the > hairdryer has worked. > >> You will also want some solder paste > > I do have solder paste. > >> Carefully hand place >> the part and heat from behind with the hot air gun. > > To add to the fun, I have back-mounted optos too..
That does add to the fun... I hope they are not back to back. You can (somewhat) protect the parts from the direct hot air contact with some aluminum foil > > I will see how I get on with the hot air gun. > > -- > atp > The idea that there is no such thing as objective truth is, quite simply, > wrong. Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ Ridiculously easy VDI. With Citrix VDI-in-a-Box, you don't need a complex infrastructure or vast IT resources to deliver seamless, secure access to virtual desktops. With this all-in-one solution, easily deploy virtual desktops for less than the cost of PCs and save 60% on VDI infrastructure costs. Try it free! http://p.sf.net/sfu/Citrix-VDIinabox _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users