> it is unclear, if the problem is with the hardware, or with the signal handling within LinuxCNC...
Really both, but I've gotten solid advice on both as well. Hardware-wise, the Mesa board looks good for my application. Signal-handling-wise, I thought that an M66 analog read could be set to return immediately and set the analog value to #*5399 for subsequent use in conditional logic. I'll play with it, but I think this lets me get it done in gcode only.* * * *Scott* On Fri, Mar 9, 2012 at 1:51 AM, Viesturs Lācis <viesturs.la...@gmail.com>wrote: > 2012/3/9 Dave <e...@dc9.tzo.com>: > > Mesa has their THC board that I believe does exactly what you are > > looking for. > > Dave, I think that it is unclear, if the problem is with the hardware, > or with the signal handling within LinuxCNC... > > > Look at the very last item on this page: > > http://www.mesanet.com/ > > Scott, THCAD-10 is the name of the board, look under "anything i/o > daughter cards" at the very bottom. > > Viesturs > > > ------------------------------------------------------------------------------ > Virtualization & Cloud Management Using Capacity Planning > Cloud computing makes use of virtualization - but cloud computing > also focuses on allowing computing to be delivered as a service. > http://www.accelacomm.com/jaw/sfnl/114/51521223/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users