On Tue, 17 Apr 2012, Andrew wrote:
Date: Tue, 17 Apr 2012 02:08:46 +0300
From: Andrew <parallel.kinemat...@gmail.com>
Reply-To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net>
Subject: Re: [Emc-users] BLDC on 7i43 + 7i39 + linear motors
17 ???????????? 2012 ??. 01:48 Andrew <parallel.kinemat...@gmail.com>
??????????????:
It's not so simple, because ini file is not loaded.
But I started entering first relevant strings from HAL, and when it came
to 3pwmgen.00.A-value 0.1 , nothing happens again.
Well, I created very simplified HAL
snip------------------------------------
And nothing happens at all. Does it mean 3pwmgen is not working?
The only noticeable thing is when the machine starts, it becomes a little
bit harder to move the forcer. When it shuts down - it releases.
BTW I work with 2.5.0 from the flash drive.
Andrew
What is the 7I39 motor voltage ?
What are the motor ratings (current /voltage)?
Do the encoders work now (because not working encoders suggests a
wiring/cable error)
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
------------------------------------------------------------------------------
For Developers, A Lot Can Happen In A Second.
Boundary is the first to Know...and Tell You.
Monitor Your Applications in Ultra-Fine Resolution. Try it FREE!
http://p.sf.net/sfu/Boundary-d2dvs2
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
