17 квітня 2012 р. 03:24 Peter C. Wallace <[email protected]> написав:
> What I am asking is if the 7I39 encoder inputs work normally now > If not, this still suggests a wiring error of some kind > I test only X axis now. The encoder is connected to 1 (A) and 3 (B) wires of ribbon cable, and it works on X axis. The cable connects 7i43 (P4) to 7i39. The motor is connected to bottom right connector on 7i39, from bottom to top: Ground, U, V, W. Top left corner orange LED on 7i39 lights, as well as bottom green LED among 5. When I start the machine, the middle orange LED of 5 lights too. I guess 7i39 receives power well. Absolutely no idea what can be wrong. BTW manual shows 1+5 leds but only 5 described. Andrew ------------------------------------------------------------------------------ Better than sec? Nothing is better than sec when it comes to monitoring Big Data applications. Try Boundary one-second resolution app monitoring today. Free. http://p.sf.net/sfu/Boundary-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
