On Sat, 2012-04-21 at 13:26 -0400, Ian McMahon wrote: > I have somewhat unreliable tool changes as well. Sometimes it'll miss > the change entirely and spin two or three revolutions before the > ladder times out. Sometimes it seems like it pops the stop too early, > and catches the turret in the wrong position. Often I'll hear what > sounds like the stop popping early and it'll make the correct change, > but I'll hear it whack past the previous station. > > > I'm going to try adjusting the magnet and see if that helps.
Mine works pretty well so far: http://www.youtube.com/watch?v=vwhz3Ho_Gx0 You might try looking at the turret signals with HALscope to make sure the encoder values and control signals are stable. -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users