On Mon, 28 May 2012, andy pugh wrote: > Date: Mon, 28 May 2012 20:55:47 +0100 > From: andy pugh <bodge...@gmail.com> > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Subject: Re: [Emc-users] Question with gantry setup snip----------------------------------------------------------------------- > > There is a daughter-board for the 5i25 (7i76) which does a lot more > than a simple BoB, but that requires a different firmware on the 5i25. > It can be changed, but it is akin to a BIOS flash, so is some effort > (and I don't think the Linux version of the utility is ready yet) >
Actually the 5I25 flash utility is available (thanks Micha Geszkiewicz!), just not committed to LinuxCNC yet. Its in the current 5i25.zip file, as are updated 5i25 configs. Probably a C10 config is no big deal I would just need to know when inputs and outputs are, and if there is a chargepump, preferred step/dir pins etc > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
