On Wednesday, May 30, 2012 08:01:58 AM John Thornton did opine: > Yes, after running the generator on the 208 taps I forgot they were on > there when I did my phase converter work over. Today I plan on trying to > contact Siemens tech support and see if they can offer up some advice. > > I'm located in swamp east Missouri... > > John I have been thru that country back in the late 50's, my first wife's folks lived in Blytheville AR., nice drive if you aren't in a hurry. And south of St Louis there are places where you can't get in a hurry without an open account at Firestone. :)
That's a fur piece from here, Weston WV, probably 2 days each way. Plus I don't want to leave Dee alone that long. Half a day each way and I'd ask for your gps co-ords. > On 5/29/2012 2:55 PM, gene heskett wrote: > > On Tuesday, May 29, 2012 03:46:29 PM John Thornton did opine: > >> The spindle drive is 6,000 rpm. > >> > >> I've not tried tap hopping yet... any downside to that? > >> > >> John > > > > I think the trip off will tell you that. So far, IIRC, you've managed > > to hit half speed, and when you lowered it by choosing the higher tap > > on the H terminals, it got worse. That tells me it needs to go up by > > feeding it on the 208 taps. > > > > I've lost track, have you tried all of them on the 208 taps yet? > > > > Basically if it still trips then, the isolation transformer you order > > should also be able to do a 10-15% step up I'm thinking. Feed it on > > the 208 taps, and load it on the 220 taps perhaps. > > > > Where are you John? I'm wondering how long a drive it might be to > > check your beer supply. :) > > > >> On 5/29/2012 12:17 PM, gene heskett wrote: > >>> On Tuesday, May 29, 2012 01:05:21 PM John Thornton did opine: > >>>> N to each X is.1 ohm > >>>> X to X is .2 ohm > >>> > >>> Damn, another good what if shot to hell. I hate it when that > >>> happens. > >>> > >>> :( > >>> > >>> So, we're probably back to an about 30 KVA isolation transformer. > >>> > >>> Has Siemens offered any advice yet? > >>> > >>> How about the 2 wires U,V on 208 lugs, the third one, W IIRC, on a > >>> 220 or 240 lug that test I mentioned? > >>> > >>> Also, what is the paper rated top speed on this drive? > >>> > >>> Cheers, Gene > >> > >> --------------------------------------------------------------------- > >> --- ------ Live Security Virtual Conference > >> Exclusive live event will cover all the ways today's security and > >> threat landscape has changed and how IT managers can respond. > >> Discussions will include endpoint security, mobile security and the > >> latest in malware threats. > >> http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > >> _______________________________________________ > >> Emc-users mailing list > >> Emc-users@lists.sourceforge.net > >> https://lists.sourceforge.net/lists/listinfo/emc-users > > > > Cheers, Gene > > ------------------------------------------------------------------------ > ------ Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. > Discussions will include endpoint security, mobile security and the > latest in malware threats. > http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) My web page: <http://coyoteden.dyndns-free.com:85/gene> You were s'posed to laugh! ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
