On 6 July 2012 08:28, Viesturs Lācis <viesturs.la...@gmail.com> wrote:
> Can anyone suggest a nice and compact motor for spindle? One of the > machines will actually need this exact setup for the exact reasons > pointed out. And the idea was to put a small drill in a spindle that > would mark the spot by stopping at certain place, pushing down the > pneumatic cylinder for a second or two, then pulling it back and > moving on. You will presumably have compressed air to the machine, if not directly to the head, and you are talking about a pneumatic cylinder, so why not use a cheap air drill? http://www.ebay.co.uk/itm//350252962023 -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
