Looking for closed loop I've tried the example close loop and nothing -----Original Message----- From: andy pugh [mailto:[email protected]] Sent: Tuesday, July 10, 2012 5:25 AM To: Enhanced Machine Controller (EMC) Subject: Re: [Emc-users] Spindle hooked to dc servo amp
On 10 July 2012 03:35, Kasey Matejcek <[email protected]> wrote: > But know I'm I have removed the a axis config setting and I'm trying > to get it looped to the spindle controls and I can't seem to make that > work Are you wanting closed-lop spindle speed control, or will open-loop work? Open-loop should just be a case of netting motion.spindle-speed-out to ppmc.0.pwm.03 and setting the PWM scale appropriately. If you want closed-loop spindle speed control, then you should be able to modify: http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Closed_Loop_Spindle_Speed_Control (Note the comment about FF0 replacing the sum2) -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ---------------------------------------------------------------------------- -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
