Sven; My D525MW boards are not beside me ATM, but your correction seems to be about right, IIRC.
Certainly not blindingly fast, but not too bad either, and little noise/heat. I hope that their lifetime is long in my applications. My numbers, like yours, were higher than seen on the "latency numbers" on the LinuxCNC web site; I wonder if, as you have done, running headless is really the way to go for best latency. I'm thinking seriously about the Mesa 5i25; I'll need one for the spindle encoder for my CNC lathe project. BTW - I'd not bet on Windows to be a secure bet for long term CNC either; don't really know what either LinuxCNC or the Mach camp are going to do a few years down the road. JohnS. On 2012-11-04, at 10:00 AM, Sven Wesley wrote: >> >> I installed LinuxCNC on my board and ran latency tests and it was quite >> easy to ramp it up to 14 250 ns. That's worse than my existing >> configuration at the reconfigured PC that's in use now that this thread >> from the beginning was about. I also made the remote X tests as discussed >> earlier in this thread and then the PC maxed out at 9 920 ns. >> >> > Correction: 18 250 ns. > ------------------------------------------------------------------------------ > LogMeIn Central: Instant, anywhere, Remote PC access and management. > Stay in control, update software, and manage PCs from one command center > Diagnose problems and improve visibility into emerging IT issues > Automate, monitor and manage. Do more in less time with Central > http://p.sf.net/sfu/logmein12331_d2d > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ LogMeIn Central: Instant, anywhere, Remote PC access and management. Stay in control, update software, and manage PCs from one command center Diagnose problems and improve visibility into emerging IT issues Automate, monitor and manage. Do more in less time with Central http://p.sf.net/sfu/logmein12331_d2d _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
