On 6/3/2013 8:48 AM, Mark Wendt wrote:
> On Mon, Jun 3, 2013 at 8:42 AM, Dave<e...@dc9.tzo.com>  wrote:
>
>    
>>> Dave,
>>>
>>> I've got both on my machine - one of the Keling MPG's and also a
>>>        
>> joystick.
>>      
>>> They have different uses the way I have them set up.  With the MPG, I can
>>> move the machine exactly .1, .01, and .001 in any axis.  With the joy
>>>        
>> stick
>>      
>>> I can do rapid moves by holding the stick over.  Depends on what you
>>>        
>> want.
>>      
>>> Mark
>>>
>>>        
>> ------------------------------------------------------------------------------
>>      
>>>
>>>        
>> I was thinking that a Joystick would be great for a plasma cutter, but I
>> need to do touch offs with the mill and that is a different situation.
>>
>> I'll see how this Chinese joystick works out.   On the low $ end of
>> pendants, it seems that the Chinese have the market cornered.
>>
>> I don't see the Jog it! being sold on Ebay or anywhere else for that
>> matter.
>>
>> Thanks,
>>
>> Dave
>>
>>      
>
> For touch-offs you are probably better set with the MPG.  Be nice if they
> had a built-in joystick on the MPG I have.  The nice thing about most of
> the joysticks is they're USB, so don't require a second parport.  Also, a
> lot of the MPG's require an adapter to go from the DB25 parallel port to
> the DB-something or other the MPG uses.  The adapter also requires 5 VDC,
> which is gotten from a spare USB port.
>
> Mark
> ------------------------------------------------------------------------------
>
>    

>>For touch-offs you are probably better set with the MPG.

That is what I was thinking...


I think I will just run it into a cheap BOB and then onto the LPT 
port.   That should make the wiring easy.

Dave



------------------------------------------------------------------------------
Get 100% visibility into Java/.NET code with AppDynamics Lite
It's a free troubleshooting tool designed for production
Get down to code-level detail for bottlenecks, with <2% overhead.
Download for free and get started troubleshooting in minutes.
http://p.sf.net/sfu/appdyn_d2d_ap2
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to