Andy I tried as below and everything shows as False. I have re-downloaded johns example files from http://gnipsel.com/linuxcnc/gui/gui08a.html I have re installed them and the gui shows fine but the power button is greyed out which is exactly what my gui is doing.
I have just altered back to axis using the same ini and hal file and axis powers up no problem. On 07/02/14 14:12, andy pugh wrote: > On 7 February 2014 13:57, Mark Tucker <m...@rmtucker.f2s.com> wrote: > >> I had already changed the comment to your version but i still have the >> same results. >> Everything works fine with axis and Gscreen but it will not work with my >> custom Gui. > You probabl need to have a look at the machine status. I find it most > convenient to open a terminal (ssh works too) and > halcmd -kf > show pin *machine* > > For example will show the status of machine-is-on etc. > > Does the button start active and de-activate? You might only need to > set it to active in Glade. Or it might be being disabled by underlying > Python code. > ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
