On 4/2/2014 11:11 AM, Jon Elson wrote: > On 04/01/2014 11:27 PM, Gregg Eshelman wrote: > > Oops, didn't read to the end. >> >> Or is there a single board that plugs into one parallel port, can run up >> to four stepper drives, read up to four TTL quadrature scale/encoder >> inputs, has an e-stop input, limit switch inputs for 3 or 4 axes, can >> control spindle on/off and a lube pump *and nothing more than that*? >> >> > Yes, see our Universal Stepper Controller > <http://pico-systems.com/osc2.5/catalog/product_info.php?cPath=4&products_id=30> > > It does all of these things. It has a couple more digital > inputs and > outputs than you strictly need, but is almost a perfect fit > to what > you describe.
That looks like it would work, and be simple/easy since it's a single board. ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
