Marius You have missed the point. I also run master from the git repository. But master fom the buildbot does not work correctly for me (wrong keys when updating). Which means i had to install from git and as steve said only the linux adept can get it. It is a case of "oh load that version from here,but if you want that particular part to work you have to load it from another place." "Oh and that place is a git to get it from"
On 03/04/14 20:31, Marius Liebenberg wrote: > Mark > Use the git method to install and compile the master branch. The wiki is > very clear and easy to follow. I turn the auto update stuff off > completely as it screws with my stuff all the time. I do a regular pull > form the branch to stay up to date. > If I installed a machine from master and it runs without hassles I just > leave it at that. > Have a look here > http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Installing_LinuxCNC#Getting_the_source_with_git > > > On 2014-04-03 21:20, Mark Tucker wrote: >> Well i tried that. >> It now continually tells me there is an update,then will not let me as >> there is something wrong with keys. >> I have to continually remove and re-install. >> A rather large pain. >> >> On 03/04/14 20:08, andy pugh wrote: >>> On 3 April 2014 19:50, Steve Blackmore <st...@pilotltd.net> wrote: >>>> now as it's been fixed it sits languishing >>>> in some place only the adept can get at. >>> It isn't _that_ hard to get the development branch. >>> Configure the Synaptic Package manager to look at the buildbot then >>> tell it to update. >>> >> ------------------------------------------------------------------------------ >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
