On 23 April 2014 22:17, Gene Heskett <ghesk...@wdtv.com> wrote: > 1. Since the tool post may get turned a few degrees to facilitate a boring > operation, how do you go about ascertaining that the tool post is truly > square so you don't have to re-invent a new tool table when its been turned > or moved?
I never turn the tool post. So far I have never needed to. > 2. Do you use fixed gages when servicing the tools in order to establish a > fixed "stickout" for that tool when re-installing it in the QC holder? I have a holder for (nearly) every tool. When I need to swap tools I touch-off again. Tool table entries correspond to the holders, not the tool, in my case (and I have stamped them). -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Start Your Social Network Today - Download eXo Platform Build your Enterprise Intranet with eXo Platform Software Java Based Open Source Intranet - Social, Extensible, Cloud Ready Get Started Now And Turn Your Intranet Into A Collaboration Platform http://p.sf.net/sfu/ExoPlatform _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users