On 24 April 2014 14:24, Gene Heskett <ghesk...@wdtv.com> wrote: > Can you PM that to me, and what size of a mill does it assume?
It assumes a 3mm endmill with at least 18mm of protrusion. I will post the G-code here just in case anyone else wants it. --------------------------------G-code-------------------------- (Filename: B105 antihole.ngc) (Post processor: EMC.scpost) (Date: 29/06/2011) G21 (Units: Metric) G40 G90 F1 (Part: B105 antihole) (Operation: Spiral pocket, Visible [ISO], T4: Mill/router, 3 mm diameter, 12 mm Deep) G00 Z100.0000 M6 T4 (Mill/router, 3 mm diameter) G43 H4 G00 Z4.0000 M03 S1200 X1.4637 Y0.0500 Z0.5000 G01 Z0.0000 F3 G02 X0.9316 Y0.1442 Z-0.3136 I-0.0000 J1.5500 F3.0 G01 X-0.1851 Y0.5523 Z-1.0000 F3 X-0.2007 Y0.5580 F5 G02 X-0.5871 Y0.7653 I0.5321 J1.4558 F5.0 G03 X-0.5871 Y-0.7653 I-0.5629 J-0.7653 G02 X-0.2007 Y-0.5580 I0.9184 J-1.2486 G01 X0.9316 Y-0.1442 F5 G02 X1.4637 Y-0.0500 I0.5321 J-1.4558 F5.0 G01 X2.0500 F5 G03 X2.0500 Y0.0500 I0.0000 J0.0500 F5.0 G01 X1.4637 F5 G02 X0.9316 Y0.1442 Z-1.3136 I-0.0000 J1.5500 F3.0 G01 X-0.1851 Y0.5523 Z-2.0000 F3 X-0.2007 Y0.5580 F5 G02 X-0.5871 Y0.7653 I0.5321 J1.4558 F5.0 G03 X-0.5871 Y-0.7653 I-0.5629 J-0.7653 G02 X-0.2007 Y-0.5580 I0.9184 J-1.2486 G01 X0.9316 Y-0.1442 F5 G02 X1.4637 Y-0.0500 I0.5321 J-1.4558 F5.0 G01 X2.0500 F5 G03 X2.0500 Y0.0500 I0.0000 J0.0500 F5.0 G01 X1.4637 F5 G02 X0.9316 Y0.1442 Z-2.3136 I-0.0000 J1.5500 F3.0 G01 X-0.1851 Y0.5523 Z-3.0000 F3 X-0.2007 Y0.5580 F5 G02 X-0.5871 Y0.7653 I0.5321 J1.4558 F5.0 G03 X-0.5871 Y-0.7653 I-0.5629 J-0.7653 G02 X-0.2007 Y-0.5580 I0.9184 J-1.2486 G01 X0.9316 Y-0.1442 F5 G02 X1.4637 Y-0.0500 I0.5321 J-1.4558 F5.0 G01 X2.0500 F5 G03 X2.0500 Y0.0500 I0.0000 J0.0500 F5.0 G01 X1.4637 F5 G02 X0.9316 Y0.1442 Z-3.3136 I-0.0000 J1.5500 F3.0 G01 X-0.1851 Y0.5523 Z-4.0000 F3 X-0.2007 Y0.5580 F5 G02 X-0.5871 Y0.7653 I0.5321 J1.4558 F5.0 G03 X-0.5871 Y-0.7653 I-0.5629 J-0.7653 G02 X-0.2007 Y-0.5580 I0.9184 J-1.2486 G01 X0.9316 Y-0.1442 F5 G02 X1.4637 Y-0.0500 I0.5321 J-1.4558 F5.0 G01 X2.0500 F5 G03 X2.0500 Y0.0500 I0.0000 J0.0500 F5.0 G01 X1.4637 F5 G02 X0.9316 Y0.1442 Z-4.3136 I-0.0000 J1.5500 F3.0 G01 X-0.1851 Y0.5523 Z-5.0000 F3 X-0.2007 Y0.5580 F5 G02 X-0.5871 Y0.7653 I0.5321 J1.4558 F5.0 G03 X-0.5871 Y-0.7653 I-0.5629 J-0.7653 G02 X-0.2007 Y-0.5580 I0.9184 J-1.2486 G01 X0.9316 Y-0.1442 F5 G02 X1.4637 Y-0.0500 I0.5321 J-1.4558 F5.0 G01 X2.0500 F5 G03 X2.0500 Y0.0500 I0.0000 J0.0500 F5.0 G01 X1.4637 F5 G02 X0.9316 Y0.1442 Z-5.3136 I-0.0000 J1.5500 F3.0 G01 X-0.1851 Y0.5523 Z-6.0000 F3 X-0.2007 Y0.5580 F5 G02 X-0.5871 Y0.7653 I0.5321 J1.4558 F5.0 G03 X-0.5871 Y-0.7653 I-0.5629 J-0.7653 G02 X-0.2007 Y-0.5580 I0.9184 J-1.2486 G01 X0.9316 Y-0.1442 F5 G02 X1.4637 Y-0.0500 I0.5321 J-1.4558 F5.0 G01 X2.0500 F5 G03 X2.0500 Y0.0500 I0.0000 J0.0500 F5.0 G01 X1.4637 F5 G02 X0.9316 Y0.1442 Z-6.3136 I-0.0000 J1.5500 F3.0 G01 X-0.1851 Y0.5523 Z-7.0000 F3 X-0.2007 Y0.5580 F5 G02 X-0.5871 Y0.7653 I0.5321 J1.4558 F5.0 G03 X-0.5871 Y-0.7653 I-0.5629 J-0.7653 G02 X-0.2007 Y-0.5580 I0.9184 J-1.2486 G01 X0.9316 Y-0.1442 F5 G02 X1.4637 Y-0.0500 I0.5321 J-1.4558 F5.0 G01 X2.0500 F5 G03 X2.0500 Y0.0500 I0.0000 J0.0500 F5.0 G01 X1.4637 F5 G02 X0.9316 Y0.1442 Z-7.3136 I-0.0000 J1.5500 F3.0 G01 X-0.1851 Y0.5523 Z-8.0000 F3 X-0.2007 Y0.5580 F5 G02 X-0.5871 Y0.7653 I0.5321 J1.4558 F5.0 G03 X-0.5871 Y-0.7653 I-0.5629 J-0.7653 G02 X-0.2007 Y-0.5580 I0.9184 J-1.2486 G01 X0.9316 Y-0.1442 F5 G02 X1.4637 Y-0.0500 I0.5321 J-1.4558 F5.0 G01 X2.0500 F5 G03 X2.0500 Y0.0500 I0.0000 J0.0500 F5.0 G01 X1.4637 F5 G02 X0.9316 Y0.1442 Z-8.3136 I-0.0000 J1.5500 F3.0 G01 X-0.1851 Y0.5523 Z-9.0000 F3 X-0.2007 Y0.5580 F5 G02 X-0.5871 Y0.7653 I0.5321 J1.4558 F5.0 G03 X-0.5871 Y-0.7653 I-0.5629 J-0.7653 G02 X-0.2007 Y-0.5580 I0.9184 J-1.2486 G01 X0.9316 Y-0.1442 F5 G02 X1.4637 Y-0.0500 I0.5321 J-1.4558 F5.0 G01 X2.0500 F5 G03 X2.0500 Y0.0500 I0.0000 J0.0500 F5.0 G01 X1.4637 F5 G02 X0.9316 Y0.1442 Z-9.3136 I-0.0000 J1.5500 F3.0 G01 X-0.1851 Y0.5523 Z-10.0000 F3 X-0.2007 Y0.5580 F5 G02 X-0.5871 Y0.7653 I0.5321 J1.4558 F5.0 G03 X-0.5871 Y-0.7653 I-0.5629 J-0.7653 G02 X-0.2007 Y-0.5580 I0.9184 J-1.2486 G01 X0.9316 Y-0.1442 F5 G02 X1.4637 Y-0.0500 I0.5321 J-1.4558 F5.0 G01 X2.0500 F5 G03 X2.0500 Y0.0500 I0.0000 J0.0500 F5.0 G01 X1.4637 F5 G02 X0.9316 Y0.1442 Z-10.3136 I-0.0000 J1.5500 F3.0 G01 X-0.1851 Y0.5523 Z-11.0000 F3 X-0.2007 Y0.5580 F5 G02 X-0.5871 Y0.7653 I0.5321 J1.4558 F5.0 G03 X-0.5871 Y-0.7653 I-0.5629 J-0.7653 G02 X-0.2007 Y-0.5580 I0.9184 J-1.2486 G01 X0.9316 Y-0.1442 F5 G02 X1.4637 Y-0.0500 I0.5321 J-1.4558 F5.0 G01 X2.0500 F5 G03 X2.0500 Y0.0500 I0.0000 J0.0500 F5.0 G01 X1.4637 F5 G02 X0.9316 Y0.1442 Z-11.3136 I-0.0000 J1.5500 F3.0 G01 X-0.1851 Y0.5523 Z-12.0000 F3 X-0.2007 Y0.5580 F5 G02 X-0.5871 Y0.7653 I0.5321 J1.4558 F5.0 G03 X-0.5871 Y-0.7653 I-0.5629 J-0.7653 G02 X-0.2007 Y-0.5580 I0.9184 J-1.2486 G01 X0.9316 Y-0.1442 F5 G02 X1.4637 Y-0.0500 I0.5321 J-1.4558 F5.0 G01 X2.0500 F5 G03 X2.0500 Y0.0500 I0.0000 J0.0500 F5.0 G01 X1.4637 F5 G02 X0.9316 Y0.1442 I-0.0000 J1.5500 F5.0 G01 X-0.1851 Y0.5523 F5 (Operation: Inside Offset, Visible [ISO], T4: Mill/router, 3 mm diameter, 12 mm Deep) G00 Z4.0000 X1.4637 Y0.1000 Z0.5000 G01 Z0.0000 F3 G02 X0.9487 Y0.1912 Z-0.3035 I-0.0000 J1.5000 F3.0 G01 X-0.1836 Y0.6050 Z-0.9995 F3 X-0.1844 Y0.6053 Z-1.0000 G02 X-0.5575 Y0.8055 I0.5157 J1.4086 F5.0 G03 X-0.5575 Y-0.8055 I-0.5925 J-0.8055 G02 X-0.1836 Y-0.6050 I0.8888 J-1.2083 G01 X0.9487 Y-0.1912 F5 G02 X1.4637 Y-0.1000 I0.5149 J-1.4088 F5.0 G01 X2.0500 F5 G03 X2.0500 Y0.1000 I0.0000 J0.1000 F5.0 G01 X1.4637 F5 G02 X0.9487 Y0.1912 Z-1.3035 I-0.0000 J1.5000 F3.0 G01 X-0.1836 Y0.6050 Z-1.9995 F3 X-0.1844 Y0.6053 Z-2.0000 G02 X-0.5575 Y0.8055 I0.5157 J1.4086 F5.0 G03 X-0.5575 Y-0.8055 I-0.5925 J-0.8055 G02 X-0.1836 Y-0.6050 I0.8888 J-1.2083 G01 X0.9487 Y-0.1912 F5 G02 X1.4637 Y-0.1000 I0.5149 J-1.4088 F5.0 G01 X2.0500 F5 G03 X2.0500 Y0.1000 I0.0000 J0.1000 F5.0 G01 X1.4637 F5 G02 X0.9487 Y0.1912 Z-2.3035 I-0.0000 J1.5000 F3.0 G01 X-0.1836 Y0.6050 Z-2.9995 F3 X-0.1844 Y0.6053 Z-3.0000 G02 X-0.5575 Y0.8055 I0.5157 J1.4086 F5.0 G03 X-0.5575 Y-0.8055 I-0.5925 J-0.8055 G02 X-0.1836 Y-0.6050 I0.8888 J-1.2083 G01 X0.9487 Y-0.1912 F5 G02 X1.4637 Y-0.1000 I0.5149 J-1.4088 F5.0 G01 X2.0500 F5 G03 X2.0500 Y0.1000 I0.0000 J0.1000 F5.0 G01 X1.4637 F5 G02 X0.9487 Y0.1912 Z-3.3035 I-0.0000 J1.5000 F3.0 G01 X-0.1836 Y0.6050 Z-3.9995 F3 X-0.1844 Y0.6053 Z-4.0000 G02 X-0.5575 Y0.8055 I0.5157 J1.4086 F5.0 G03 X-0.5575 Y-0.8055 I-0.5925 J-0.8055 G02 X-0.1836 Y-0.6050 I0.8888 J-1.2083 G01 X0.9487 Y-0.1912 F5 G02 X1.4637 Y-0.1000 I0.5149 J-1.4088 F5.0 G01 X2.0500 F5 G03 X2.0500 Y0.1000 I0.0000 J0.1000 F5.0 G01 X1.4637 F5 G02 X0.9487 Y0.1912 Z-4.3035 I-0.0000 J1.5000 F3.0 G01 X-0.1836 Y0.6050 Z-4.9995 F3 X-0.1844 Y0.6053 Z-5.0000 G02 X-0.5575 Y0.8055 I0.5157 J1.4086 F5.0 G03 X-0.5575 Y-0.8055 I-0.5925 J-0.8055 G02 X-0.1836 Y-0.6050 I0.8888 J-1.2083 G01 X0.9487 Y-0.1912 F5 G02 X1.4637 Y-0.1000 I0.5149 J-1.4088 F5.0 G01 X2.0500 F5 G03 X2.0500 Y0.1000 I0.0000 J0.1000 F5.0 G01 X1.4637 F5 G02 X0.9487 Y0.1912 Z-5.3035 I-0.0000 J1.5000 F3.0 G01 X-0.1836 Y0.6050 Z-5.9995 F3 X-0.1844 Y0.6053 Z-6.0000 G02 X-0.5575 Y0.8055 I0.5157 J1.4086 F5.0 G03 X-0.5575 Y-0.8055 I-0.5925 J-0.8055 G02 X-0.1836 Y-0.6050 I0.8888 J-1.2083 G01 X0.9487 Y-0.1912 F5 G02 X1.4637 Y-0.1000 I0.5149 J-1.4088 F5.0 G01 X2.0500 F5 G03 X2.0500 Y0.1000 I0.0000 J0.1000 F5.0 G01 X1.4637 F5 G02 X0.9487 Y0.1912 Z-6.3035 I-0.0000 J1.5000 F3.0 G01 X-0.1836 Y0.6050 Z-6.9995 F3 X-0.1844 Y0.6053 Z-7.0000 G02 X-0.5575 Y0.8055 I0.5157 J1.4086 F5.0 G03 X-0.5575 Y-0.8055 I-0.5925 J-0.8055 G02 X-0.1836 Y-0.6050 I0.8888 J-1.2083 G01 X0.9487 Y-0.1912 F5 G02 X1.4637 Y-0.1000 I0.5149 J-1.4088 F5.0 G01 X2.0500 F5 G03 X2.0500 Y0.1000 I0.0000 J0.1000 F5.0 G01 X1.4637 F5 G02 X0.9487 Y0.1912 Z-7.3035 I-0.0000 J1.5000 F3.0 G01 X-0.1836 Y0.6050 Z-7.9995 F3 X-0.1844 Y0.6053 Z-8.0000 G02 X-0.5575 Y0.8055 I0.5157 J1.4086 F5.0 G03 X-0.5575 Y-0.8055 I-0.5925 J-0.8055 G02 X-0.1836 Y-0.6050 I0.8888 J-1.2083 G01 X0.9487 Y-0.1912 F5 G02 X1.4637 Y-0.1000 I0.5149 J-1.4088 F5.0 G01 X2.0500 F5 G03 X2.0500 Y0.1000 I0.0000 J0.1000 F5.0 G01 X1.4637 F5 G02 X0.9487 Y0.1912 Z-8.3035 I-0.0000 J1.5000 F3.0 G01 X-0.1836 Y0.6050 Z-8.9995 F3 X-0.1844 Y0.6053 Z-9.0000 G02 X-0.5575 Y0.8055 I0.5157 J1.4086 F5.0 G03 X-0.5575 Y-0.8055 I-0.5925 J-0.8055 G02 X-0.1836 Y-0.6050 I0.8888 J-1.2083 G01 X0.9487 Y-0.1912 F5 G02 X1.4637 Y-0.1000 I0.5149 J-1.4088 F5.0 G01 X2.0500 F5 G03 X2.0500 Y0.1000 I0.0000 J0.1000 F5.0 G01 X1.4637 F5 G02 X0.9487 Y0.1912 Z-9.3035 I-0.0000 J1.5000 F3.0 G01 X-0.1836 Y0.6050 Z-9.9995 F3 X-0.1844 Y0.6053 Z-10.0000 G02 X-0.5575 Y0.8055 I0.5157 J1.4086 F5.0 G03 X-0.5575 Y-0.8055 I-0.5925 J-0.8055 G02 X-0.1836 Y-0.6050 I0.8888 J-1.2083 G01 X0.9487 Y-0.1912 F5 G02 X1.4637 Y-0.1000 I0.5149 J-1.4088 F5.0 G01 X2.0500 F5 G03 X2.0500 Y0.1000 I0.0000 J0.1000 F5.0 G01 X1.4637 F5 G02 X0.9487 Y0.1912 Z-10.3035 I-0.0000 J1.5000 F3.0 G01 X-0.1836 Y0.6050 Z-10.9995 F3 X-0.1844 Y0.6053 Z-11.0000 G02 X-0.5575 Y0.8055 I0.5157 J1.4086 F5.0 G03 X-0.5575 Y-0.8055 I-0.5925 J-0.8055 G02 X-0.1836 Y-0.6050 I0.8888 J-1.2083 G01 X0.9487 Y-0.1912 F5 G02 X1.4637 Y-0.1000 I0.5149 J-1.4088 F5.0 G01 X2.0500 F5 G03 X2.0500 Y0.1000 I0.0000 J0.1000 F5.0 G01 X1.4637 F5 G02 X0.9487 Y0.1912 Z-11.3035 I-0.0000 J1.5000 F3.0 G01 X-0.1836 Y0.6050 Z-11.9995 F3 X-0.1844 Y0.6053 Z-12.0000 G02 X-0.5575 Y0.8055 I0.5157 J1.4086 F5.0 G03 X-0.5575 Y-0.8055 I-0.5925 J-0.8055 G02 X-0.1836 Y-0.6050 I0.8888 J-1.2083 G01 X0.9487 Y-0.1912 F5 G02 X1.4637 Y-0.1000 I0.5149 J-1.4088 F5.0 G01 X2.0500 F5 G03 X2.0500 Y0.1000 I0.0000 J0.1000 F5.0 G01 X1.4637 F5 G02 X0.9487 Y0.1912 I-0.0000 J1.5000 F5.0 G01 X-0.1836 Y0.6050 F5 X-0.1844 Y0.6053 G00 Z4.0000 M05 M05 M30 -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Start Your Social Network Today - Download eXo Platform Build your Enterprise Intranet with eXo Platform Software Java Based Open Source Intranet - Social, Extensible, Cloud Ready Get Started Now And Turn Your Intranet Into A Collaboration Platform http://p.sf.net/sfu/ExoPlatform _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
