On 04/30/2014 01:37 PM, Curtis Dutton wrote: > I have tuned it up and it seems to be tuned well, and has a low following > error (< 0.01mm) at about 400mm/min and below. > > The problem is that it seems to rapidly increase from there. 0.1mm around > 3000mm/min and 1.5mm at around 12000mm/min. > 12 m/min? That error is only .0125 of the travel at that speed. > > What do people with home shop mills see? > Certainly no home shop mills are running at 12 m/min! Probably no home shop routers are going that fast, either. My mill is limited to less than 2 m/min, and I get an error of less than .1mm at that speed.
Jon ------------------------------------------------------------------------------ "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available. Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
