2014-05-13 21:40 GMT+03:00 Ralph Stirling <[email protected]>:
> It seems to me what you really want is a jointer. You > are just planing down the edge of a board of variable > width, correct? That is what a jointer is for. > Pretty much yes, except that board widths will randomly change from 80 to 300 mm and AFAIK none of the existing solutions can handle that. All of them have to be set up for particular width, but they cannot adapt "on fly" and it is very difficult to rebuild them so that they could do so, that is why I think that building such a thing from scratch is easier. But since I feel stronger in mechanics, I had difficulties coming up with some way, how to manage measuring boards and repositioning the motor. So it seems that lever with an encoder at pivot point and hydraulic door damper will have to handle the measuring part. Viesturs ------------------------------------------------------------------------------ "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
