On Tue, May 13, 2014 at 4:14 PM, Viesturs Lācis <[email protected]> wrote: > 2014-05-13 21:40 GMT+03:00 Ralph Stirling <[email protected]>: > >> It seems to me what you really want is a jointer. You >> are just planing down the edge of a board of variable >> width, correct? That is what a jointer is for. >> > > Pretty much yes, except that board widths will randomly change from 80 to > 300 mm and AFAIK none of the existing solutions can handle that.
His point is that you are making this complicated by trying to cut both sides at once. A jointer presses the board against a fence and cuts that side; you could then have another jointer down the line where other side of the board is pressed against the fence on the other side and the matching profile is cut. ------------------------------------------------------------------------------ "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
