On Thursday 28 August 2014 09:41:15 David Armstrong did opine And Gene did reply: > Guy's > i'm having a problem trying to get a analog 10v spinde to scale > correctly > > the spindle has a 1000 count encoder > and gives a speed of 6200 rpm
Thats good info but does go far enough. Does it do A/B/Z outputs in quadrature format? At 1000ppr, thats an edge rate into the encoder module of a bit north of 100 kilohertz at 6200 rpms. If its quadrature A/B/Z output then that the equ of slight more than 410 kilohertz rate for determining the encoders position. This will absolutely preclude the use of a pure software approach thru the parport. > now either i set the scale at 62 > and i get movement or what i thought was correct and get full speed and > no change > > as i calculate if i am correct top speed 6200 so 10/6200 = 0.00161 > in my ini i have > > OUTPUT_SCALE = 0.00161 > > i have not touched the scale setting in the hal file > setp scale.spindle.gain 60 In most hal files this would be used to drive the tachometer graphic by multiplying the encoders velocity output, usually in RPS, so it displays RPM. > setp lowpass.spindle.gain 1.000000 And this would be set at a much smaller value to steady the graphic tachometer. Otherwise the needle is so bouncy its hard to follow, or if using the bar graph version, the last 2 digits of the rpm displayed are so random as to be a bit un-nerving because you just know, with the mass of the chuck and all, it can't possibly be changing its speed by a hundred or more rpms 10x a second which is the usual display update rate. So we need more info before we can do much more than make SWAG's about what you'll need to do. > which i dont think i need so , > so just becoming confused > > any guidance please I will, in the next day or 4, be getting all this built and sorted, using one of the Pico Systems PWM driven servo amplifiers to run the spindle on my 7x12, using a Mesa 5i25 card without any accessory cards attached. So that obviously will color what I have to say. Someone else, using different hardware from mine will probably have totally different ideas about how to go about calibrating this. > Dave > ----------------------------------------------------------------------- > ------- Slashdot TV. > Video for Nerds. Stuff that matters. > http://tv.slashdot.org/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> US V Castleman, SCOTUS, Mar 2014 is grounds for Impeaching SCOTUS ------------------------------------------------------------------------------ Slashdot TV. Video for Nerds. Stuff that matters. http://tv.slashdot.org/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
