The 7i77 card will read that with no problems. In fact it can go a whole 
lot faster.

On 2014-08-28 16:30, David Armstrong wrote:
> Gene ,
> this is with a 5i25 and 7i77 analog card ,
>
>
> On 28 August 2014 15:29, David Armstrong <[email protected]> wrote:
>
>> yes sorry gene in my haste yes it has full quad a b z
>>
>>
>> On 28 August 2014 15:24, Gene Heskett <[email protected]> wrote:
>>
>>> On Thursday 28 August 2014 09:41:15 David Armstrong did opine
>>> And Gene did reply:
>>>> Guy's
>>>> i'm having a problem trying to get a analog 10v spinde to scale
>>>> correctly
>>>>
>>>> the spindle has a 1000 count encoder
>>>> and gives a speed of 6200 rpm
>>> Thats good info but does go far enough. Does it do A/B/Z outputs in
>>> quadrature format?
>>>
>>> At 1000ppr, thats an edge rate into the encoder module of a bit north of
>>> 100 kilohertz at 6200 rpms.  If its quadrature A/B/Z output then that the
>>> equ of slight more than 410 kilohertz rate for determining the encoders
>>> position.
>>>
>>> This will absolutely preclude the use of a pure software approach thru the
>>> parport.
>>>
>>>> now either i set the scale at 62
>>>> and i get movement or what i thought was correct and get full speed and
>>>> no change
>>>>
>>>> as i calculate if i am correct top speed 6200  so 10/6200 = 0.00161
>>>> in my ini i have
>>>>
>>>> OUTPUT_SCALE = 0.00161
>>>>
>>>> i have not touched the scale setting in the hal file
>>>> setp     scale.spindle.gain 60
>>> In most hal files this would be used to drive the tachometer graphic by
>>> multiplying the encoders velocity output, usually in RPS, so it displays
>>> RPM.
>>>
>>>> setp     lowpass.spindle.gain 1.000000
>>> And this would be set at a much smaller value to steady the graphic
>>> tachometer.  Otherwise the needle is so bouncy its hard to follow, or if
>>> using the bar graph version, the last 2 digits of the rpm displayed are so
>>> random as to be a bit un-nerving because you just know, with the mass of
>>> the chuck and all, it can't possibly be changing its speed by a hundred or
>>> more rpms 10x a second which is the usual display update rate.  So we need
>>> more info before we can do much more than make SWAG's about what you'll
>>> need to do.
>>>
>>>> which i dont think i need so ,
>>>> so just becoming confused
>>>>
>>>> any guidance please
>>> I will, in the next day or 4, be getting all this built and sorted, using
>>> one of the Pico Systems PWM driven servo amplifiers to run the spindle on
>>> my 7x12, using a Mesa 5i25 card without any accessory cards attached.  So
>>> that obviously will color what I have to say.  Someone else, using
>>> different hardware from mine will probably have totally different ideas
>>> about how to go about calibrating this.
>>>
>>>> Dave
>>>> -----------------------------------------------------------------------
>>>> ------- Slashdot TV.
>>>> Video for Nerds.  Stuff that matters.
>>>> http://tv.slashdot.org/
>>>> _______________________________________________
>>>> Emc-users mailing list
>>>> [email protected]
>>>> https://lists.sourceforge.net/lists/listinfo/emc-users
>>>
>>> Cheers, Gene Heskett
>>> --
>>> "There are four boxes to be used in defense of liberty:
>>>   soap, ballot, jury, and ammo. Please use in that order."
>>> -Ed Howdershelt (Author)
>>> Genes Web page <http://geneslinuxbox.net:6309/gene>
>>> US V Castleman, SCOTUS, Mar 2014 is grounds for Impeaching SCOTUS
>>>
>>>
>>> ------------------------------------------------------------------------------
>>> Slashdot TV.
>>> Video for Nerds.  Stuff that matters.
>>> http://tv.slashdot.org/
>>> _______________________________________________
>>> Emc-users mailing list
>>> [email protected]
>>> https://lists.sourceforge.net/lists/listinfo/emc-users
>>>
>>
> ------------------------------------------------------------------------------
> Slashdot TV.
> Video for Nerds.  Stuff that matters.
> http://tv.slashdot.org/
> _______________________________________________
> Emc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/emc-users
>

-- 

Regards /Groete

Marius D. Liebenberg
+27 82 698 3251
+27 12 743 6064
QQ 1767394877


------------------------------------------------------------------------------
Slashdot TV.  
Video for Nerds.  Stuff that matters.
http://tv.slashdot.org/
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to