Dave
If you are using a 2048 pulse per rev quadrature encoder in counter mode 
then only the A channel pulses will be counted. Both edges are counted 
so you get 4096 pulses per revolution. And I think it should be scaled 
to revolutions per second. Not sure of this though.


On 2014-08-28 15:41, David Armstrong wrote:
> Guy's
> i'm having a problem trying to get a analog 10v spinde to scale correctly
>
> the spindle has a 1000 count encoder
> and gives a speed of 6200 rpm
>
> now either i set the scale at 62
> and i get movement or what i thought was correct and get full speed and no
> change
>
> as i calculate if i am correct top speed 6200  so 10/6200 = 0.00161
> in my ini i have
>
> OUTPUT_SCALE = 0.00161
>
> i have not touched the scale setting in the hal file
> setp     scale.spindle.gain 60
> setp     lowpass.spindle.gain 1.000000
>
> which i dont think i need so ,
> so just becoming confused
>
> any guidance please
>
> Dave
> ------------------------------------------------------------------------------
> Slashdot TV.
> Video for Nerds.  Stuff that matters.
> http://tv.slashdot.org/
> _______________________________________________
> Emc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/emc-users
>

-- 

Regards /Groete

Marius D. Liebenberg
+27 82 698 3251
+27 12 743 6064
QQ 1767394877


------------------------------------------------------------------------------
Slashdot TV.  
Video for Nerds.  Stuff that matters.
http://tv.slashdot.org/
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to