On 21 November 2014 20:56, Jeff Johnson <john...@superiorroll.com> wrote: > Pete Wrote
> If you read that HAAS control description of how their Run, stop, jog, > continue works it seems to be pretty logical to me. It simply requires the > OP to after he has jogged to wherever he need to jog back to a position > CLOSE to where the pause happened initially and then hit a key and the > machine then takes over jogging at 5% speed to the original position. I have been experimenting with the JWP from Machinekit in LinuxCNC. On the stock LinuxCNC 2.6.4 source in git I downloaded https://github.com/mhaberler/machinekit/commit/6b0aaf39b81cc6507de41b5a74a6b0414744ea38.patch And applied it with git am -3 < 6b0aaf39b81cc6507de41b5a74a6b0414744ea38.patch Then recompiled. Then in a lathe config, by setting the new hal-pins motion.pause-offset-x 1 motion.pause-offset-x 1 motion.pause-jog-feed 1 motion.pause-offet-enable 1 I get the behaviour shown here: http://youtu.be/mSx2zIUWVzQ I suspect that this would work for you, though appreciate that what you want is something in the released software. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server from Actuate! Instantly Supercharge Your Business Reports and Dashboards with Interactivity, Sharing, Native Excel Exports, App Integration & more Get technology previously reserved for billion-dollar corporations, FREE http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
