Looks really good. I've understood that you're running the axis with position open loop control. Am I wrong? Il giorno 25/mar/2015 20:52, "Leonardo Marsaglia" < leonardomarsagli...@gmail.com> ha scritto:
> 2015-03-25 16:46 GMT-03:00 alex chiosso <achio...@gmail.com>: > > > How are you managing the positioning right now? > > Are you using limit switches or incremental encoder or something else? > > > > Now I'm using incremental encoders on both axis and I'm finishing the setup > with LinuxCNC. For the linear axis the maximum error is like 0.1 mm wich is > really good considering the setup and also considering the accuracy that I > need. > > The other one I'm going to make some tuning tomorrow and I'll be telling > you. Also tomorrow I'll be uploading some videos of the machine running. > > > -- > *Leonardo Marsaglia*. > > ------------------------------------------------------------------------------ > Dive into the World of Parallel Programming The Go Parallel Website, > sponsored > by Intel and developed in partnership with Slashdot Media, is your hub for > all > things parallel software development, from weekly thought leadership blogs > to > news, videos, case studies, tutorials and more. Take a look and join the > conversation now. http://goparallel.sourceforge.net/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users