------ Original Message ------ From: "andy pugh" <[email protected]> To: "Marius Liebenberg" <[email protected]>; "Enhanced Machine Controller (EMC)" <[email protected]> Sent: 2015-05-08 11:40:02 Subject: Re: [Emc-users] Laser and mesa
>On 8 May 2015 at 10:00, Marius Liebenberg <[email protected]> >wrote: >> I am busy with a large laser machine ( 3200 x 2100 ) bed size and I >>want >> to use some Mesa cards to drive the lot with. > >Is this a raster or vector application? Probably vector using Sheetcam > >I think that people have had difficulty with dummy-Z and spindle both >causing motion stutters, the right way might be M67 I am doing a component to do the power to motion compensation and control. S I will use the initial spindle setting for the required max power and adapt that to the speed. There will be no Z axis except for a manual control of the bed that will be moved up or down prior to the cutting to accommodate the material thickness. > >-- >atp >If you can't fix it, you don't own it. >http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
