On Fri, 8 May 2015, Marius Liebenberg wrote: > Date: Fri, 08 May 2015 09:00:19 +0000 > From: Marius Liebenberg <[email protected]> > To: "Enhanced Machine Controller (EMC)" <[email protected]> > Subject: [Emc-users] Laser and mesa > > I am busy with a large laser machine ( 3200 x 2100 ) bed size and I want > to use some Mesa cards to drive the lot with. > I have steppers on the axis and I have to control the laser power source > with what I think is a pwm signal. > I opted for the 5i25 with 7i76 combination. My question is two fold. > Firstly, has anyone on the list done this before and secondly, is the > spindle interface the right thing for the job? >
I dont know about the spindle interface, but if you need a PWM signal from the 5i25/7I76 you probably want slightly modified firmware that steals one of the step/dir outputs and uses it for a PWM output instead > > > ----------------------------- > Regards / Groete > > Marius D. Liebenberg > +27 82 698 3251 > +27 12 746 6064 > ------------------------------------------------------------------------------ > One dashboard for servers and applications across Physical-Virtual-Cloud > Widest out-of-the-box monitoring support with 50+ applications > Performance metrics, stats and reports that give you Actionable Insights > Deep dive visibility with transaction tracing using APM Insight. > http://ad.doubleclick.net/ddm/clk/290420510;117567292;y > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
