On 11 May 2015 at 15:07, Gene Heskett <ghesk...@wdtv.com> wrote: > I next drive the mounted tool so that it is sitting in gentle > contact with the left end of that cut, touch-off z to 0.0, and measure > the OD, in this case 32.3mm, and touch off x, redoing it if the DRO > diameter isn't correct. The DRO diameter was showing 32.30.
This sounds a fair bit like what I do, so ought to work. It only goes wrong for me when I forget that I am in in radius mode (generally only after breaking out of a routine that changes mode, or at first power on). I have just had the idea that a G7 in this line (and in 2456) http://git.linuxcnc.org/gitweb?p=linuxcnc.git;a=blob;f=src/emc/usr_intf/axis/scripts/axis.py;h=90ca1a901b45fefd8c0f3d8d4535b1d552abae28;hb=HEAD#l2417 Could save a lot of bother. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
