On Monday 11 May 2015 10:24:35 andy pugh wrote: > On 11 May 2015 at 15:07, Gene Heskett <ghesk...@wdtv.com> wrote: > > I next drive the mounted tool so that it is sitting in gentle > > contact with the left end of that cut, touch-off z to 0.0, and > > measure the OD, in this case 32.3mm, and touch off x, redoing it if > > the DRO diameter isn't correct. The DRO diameter was showing 32.30. > > This sounds a fair bit like what I do, so ought to work. > It only goes wrong for me when I forget that I am in in radius mode > (generally only after breaking out of a routine that changes mode, or > at first power on). > > I have just had the idea that a G7 in this line (and in 2456) > http://git.linuxcnc.org/gitweb?p=linuxcnc.git;a=blob;f=src/emc/usr_int >f/axis/scripts/axis.py;h=90ca1a901b45fefd8c0f3d8d4535b1d552abae28;hb=HE >AD#l2417 Could save a lot of bother.
I just put that line in the ini file, seems much better behaved now. Thanks Andy Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
