Well it's 274 not 247 JT
On 5/11/2015 10:43 AM, John Thornton wrote: > Or you could just put RS247NGC_STARTUP_CODE = G7 in the RS247NGC section > for power on. Of course that won't help with a program changes it and > does not put it back. > > JT > > On 5/11/2015 9:24 AM, andy pugh wrote: >> On 11 May 2015 at 15:07, Gene Heskett <ghesk...@wdtv.com> wrote: >>> I next drive the mounted tool so that it is sitting in gentle >>> contact with the left end of that cut, touch-off z to 0.0, and measure >>> the OD, in this case 32.3mm, and touch off x, redoing it if the DRO >>> diameter isn't correct. The DRO diameter was showing 32.30. >> This sounds a fair bit like what I do, so ought to work. >> It only goes wrong for me when I forget that I am in in radius mode >> (generally only after breaking out of a routine that changes mode, or >> at first power on). >> >> I have just had the idea that a G7 in this line (and in 2456) >> http://git.linuxcnc.org/gitweb?p=linuxcnc.git;a=blob;f=src/emc/usr_intf/axis/scripts/axis.py;h=90ca1a901b45fefd8c0f3d8d4535b1d552abae28;hb=HEAD#l2417 >> Could save a lot of bother. >> > > ------------------------------------------------------------------------------ > One dashboard for servers and applications across Physical-Virtual-Cloud > Widest out-of-the-box monitoring support with 50+ applications > Performance metrics, stats and reports that give you Actionable Insights > Deep dive visibility with transaction tracing using APM Insight. > http://ad.doubleclick.net/ddm/clk/290420510;117567292;y > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users