If you have it wired, just rotate n turns and watch the variable get updated in halmeter
should come to some sensible number I wouldnt be surprised to see it being n*(700 or 8000 clue in the part number)* 4 Dave Caroline On 21/05/2015, Rick Lair <[email protected]> wrote: > I have a Fanuc spindle motor on the VMC I am retrofitting right now, > and I intercepted the motor encoder cable, with an ENCY card from Mesa, > the machine was open loop in regards to the spindle prior to this. > > Would anyone know what the PPR might be on one of these, I didn't know > if they used a common PPR encoder on these motors, or of maybe a way to > figure out what it is? The motor is from 1984, it is a model 8, PN: > A06B-1008-B 700#8000. I can't find any data for it any where, and I am > not sure what to put in INI section to try to get it going. > > > -- > > Thanks > > > Rick Lair > Superior Roll & Turning LLC > 399 East Center Street > Petersburg MI, 49270 > PH: 734-279-1831 > FAX: 734-279-1166 > www.superiorroll.com > > > ------------------------------------------------------------------------------ > One dashboard for servers and applications across Physical-Virtual-Cloud > Widest out-of-the-box monitoring support with 50+ applications > Performance metrics, stats and reports that give you Actionable Insights > Deep dive visibility with transaction tracing using APM Insight. > http://ad.doubleclick.net/ddm/clk/290420510;117567292;y > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
