If you add an index to the spindle then you might as well add an encoder to the spindle. That would solve the rigid tapping problem.
On Fri, May 22, 2015 at 7:13 AM, Todd Zuercher <[email protected]> wrote: > What if he were to add an index to the spindle. would that fix the rigid > tapping problem? > > ----- Original Message ----- > From: "andy pugh" <[email protected]> > To: "Enhanced Machine Controller (EMC)" <[email protected]> > Sent: Friday, May 22, 2015 7:17:52 AM > Subject: Re: [Emc-users] Fanuc Spindle Motor Encoder PPR > > On 22 May 2015 at 12:09, Rick Lair <[email protected]> wrote: > > Another question regarding this, seems how the encoder is on the motor, > > and there is a 2 speed transmission on the spindle, High is 1:1 and low > > 1:6.325, what HAL component, other than SCALE, do I need to use to > > change the ratio for the low speed feedback to the readout display, and > > controller for that matter. > > What do you want to use the encoder output for? > > If it is just spindle speed, then it will work. If you want to use it > for spindle alignment then it won't work as the index will be at a > different spindle position every time. > Look at the "gearchange" component for a simple way to configure a > 2-speed spindle. For more gears it gets more difficult. > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > One dashboard for servers and applications across Physical-Virtual-Cloud > Widest out-of-the-box monitoring support with 50+ applications > Performance metrics, stats and reports that give you Actionable Insights > Deep dive visibility with transaction tracing using APM Insight. > http://ad.doubleclick.net/ddm/clk/290420510;117567292;y > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------------------------ > One dashboard for servers and applications across Physical-Virtual-Cloud > Widest out-of-the-box monitoring support with 50+ applications > Performance metrics, stats and reports that give you Actionable Insights > Deep dive visibility with transaction tracing using APM Insight. > http://ad.doubleclick.net/ddm/clk/290420510;117567292;y > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Addressee is the intended audience. If you are not the addressee then my consent is not given for you to read this email furthermore it is my wish you would close this without saving or reading, and cease and desist from saving or opening my private correspondence. Thank you for honoring my wish. ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
