Ooooooooohhhhhh, Now I see what you mean, individual gearchange components for each signal,
That makes sense, still half to fully wrap my head around it to get it configured, but I see where you were going. Rick On 5/22/2015 7:32 AM, andy pugh wrote: > On 22 May 2015 at 12:25, Rick Lair <[email protected]> wrote: >> I already have the gearchange configured, I was just trying to get the >> feedback correct on the visual readout on the screen, > You might want three of them, one for spindle command, one for encoder > velocity and one for encoder position. > >> Do you think that under these circumstances, it eliminates the chance of >> rigid tapping on this machine? > The 1:1 gear will be fine. > > I think (if you scale the position) it will work in the other gear,but > _not_ for peck tapping. > -- Thanks Rick Lair Superior Roll & Turning LLC 399 East Center Street Petersburg MI, 49270 PH: 734-279-1831 FAX: 734-279-1166 www.superiorroll.com ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
