On Thu, Jun 4, 2015 at 1:10 PM, Viesturs Lācis <viesturs.la...@gmail.com> wrote:
> 2015-06-04 15:32 GMT+03:00 Mark Wendt <wendt.m...@gmail.com>: > > Sounds like they're addressing one problem by effectively creating > another > > problem. If you need one computer to see the GUI and one for realtime > > effects, why not just start out with a real computer and load Linux and > > LinuxCNC on it? > > Because you do not need PC to run the GUI. There already is an app for > Androids (available in google's play store, do not know about apple > devices) so that you can run the GUI on smartphone or tablet as well - > I already have tested this on my smartphone and Machinekit, running on > BBB. Conclusion - 5 inch display is too small, but it did work (well, > to be honest, it is recommended for tablets rather than smartphones > and now I know why). > > Viesturs > OK, perhaps I should have said another computer, rather than another PC. Androids are computers. Still, you need another machine to run the machine that runs the machine. Mark ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users