I have in 4mm SHCS grade 12.9 the following lengths 10, 14, 25, and 50. JT
On 6/18/2015 6:57 AM, John Thornton wrote: > Gene, > > I'm pretty sure I have some of those screws... I just need to finish my > coffee and go look in the metric screw box. > > JT > > On 6/17/2015 8:46 PM, Gene Heskett wrote: >> 5 each 4mmx.70x20mm black hi-tensile allen head cap screws. >> >> One coupling is missing its clamp screw, and one motor mount is missing >> the mount screws for the Y motor. Box of 100, with ship, a few cents >> above a $20 bill. Heck, I burnt more gas than that touring 2 counties >> here without finding them, so I can't fuss too loud, nobody would listen >> anyway. >> >> I felt a little better today, made the shims for the two couplings that >> needed to go from an 8mm shaft to a 3/8" coupling, seems they'll work >> just fine. Tomorrow bore the 1/2" out to 14mm. By then I might have the >> card from PCW & can start configuring the computer, but I want to round >> up some motor wire before I start the teardown. Thats something else >> thats hard to come by in these here parts. I'll probably wind up at >> Tolley Electric in Clarksburg for that. Need some cable chain to >> contain the rats nest too, hope Tolley has that. >> >> Progress, from a one man circus. ;-) >> >> Cheers, Gene Heskett > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
