Greetings; In the process of doing some trial assemblies of the motor to screw adaptors, I noted that there was only perhaps a fraction of an mm of clearance at best on 2 sides of the zerk style fitting installed in the Y nut, so I backed that adaptor off the nut and made some more clearance, but I don't think I have enough yet. Is there a cad drawing I can look at that shows how much is required in order to access it with a std, genuine Chinese imported for Merican usage, grease gun? The type with the mini-cartridge that I keep 2 or so preloaded with either auto style, or lubriplate BB grades of grease. For that push on, bend off connection, it will need nearly 1/8" of clearance all around the nipple. Or am I behind the state of the art, and there is now a miniature version of that which I could retrofit my hand pumped small guns with? Thanks.
Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users