Maybe switch to needle style grease fittings? Best, Jason
On Fri, Jun 19, 2015 at 8:33 PM, Gene Heskett <ghesk...@wdtv.com> wrote: > Greetings; > > In the process of doing some trial assemblies of the motor to screw > adaptors, I noted that there was only perhaps a fraction of an mm of > clearance at best on 2 sides of the zerk style fitting installed in the > Y nut, so I backed that adaptor off the nut and made some more > clearance, but I don't think I have enough yet. Is there a cad drawing > I can look at that shows how much is required in order to access it with > a std, genuine Chinese imported for Merican usage, grease gun? The type > with the mini-cartridge that I keep 2 or so preloaded with either auto > style, or lubriplate BB grades of grease. For that push on, bend off > connection, it will need nearly 1/8" of clearance all around the nipple. > Or am I behind the state of the art, and there is now a miniature > version of that which I could retrofit my hand pumped small guns with? > > Thanks. > > Cheers, Gene Heskett > -- > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author) > Genes Web page <http://geneslinuxbox.net:6309/gene> > > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users