Sorry Seb, it's been a very long week with our machines, Between 2.6.6 and 2.6.5
We have been on 2.6.4 since it was released, and after I asked about the pin name changes the other day in gmoccapy, I came out and updated 1 of our turning centers, and noticed this problem, not thinking it was Linuxcnc, because it was the machine that the HD took a crap on. I just went through and started back at 2.6.4, compiled, loaded a program, halui.program.pause and halui.program.resume work fine, as soon as it see's the input, instantaneously I get the intended outputs/machine reaction. Did the same thing with 2.6.5, same results, instantaneous outputs. Did the same thing with 2.6.6, now I see a delay in the output of the intended input, by a second or so. Rick On 07/15/2015 02:49 PM, Sebastian Kuzminsky wrote: > On 7/15/15 12:37 PM, Rick wrote: >> Hello Guys, >> >> I just narrowed it down to the release, in version 2.6 something went >> off path in regards to halui.program.pause and halui.program.resume. >> >> I have manual pushbuttons on the rolling guards of the machines to >> initiate a feedhold, and to resume the operation. In 2.6 there is a >> slight delay, maybe .5 -1.0 second before either machine motion stops, >> and I get the output of halui.program.is-paused ( which is tied to a red >> led on the rolling guard as well), or the machine resumes operation and >> I get the output of halui.program.is-running ( which is tied to a green >> led next to the red led on the guard). > Are you saying the delay between asserting halui.program.pause and the > machine actually pausing is longer in 2.6 than in 2.5, on the same hardware? > > ------------------------------------------------------------------------------ Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
