On 24 September 2015 at 20:12, Gene Heskett <ghesk...@wdtv.com> wrote: > So any diddling of maps will be done with a G10 L2 P2 axis's which will > adjust G55, leaving G54 in the as homed condition. IOW do the probing > while G54 is in effect, but modify G55 with the results of the probing.
It might help to note that G30.1 stores the current absolute position into #5181 et. seq. http://www.linuxcnc.org/docs/html/gcode/gcode.html#sec:G30-G30_1 -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
