On 10/8/2015 2:46 PM, Gene Heskett wrote: > On Thursday 08 October 2015 14:01:12 Valerio Bellizzomi wrote: > >> On Thu, 2015-10-08 at 03:10 -0400, Gene Heskett wrote: >>> Greetings all; >>> >>> I had one of those "colonoscopy" cameras you could buy on ebay for >>> about $22 USD on my toy mill, and had it pretty well calibrated but >>> hadn't put it to any real use as yet when I knocked it loose with an >>> errant hold down bolt on that furniture joint carving jig. I'd been >>> meaning to restore it as it also came loose in its teeny little >>> tubular housing and would need so rtv to glue it back into the >>> tubing so the cable couldn't pull it out the rear if the cable hung >>> up. But making an alignable mounting was also a PITA, so its been >>> waiting for me to find a round tuit. >> I have attempted to use a webcam with camview, I was only able to >> display the camera image in a separate window. No way to configure it >> to display camera image within a Gmoccapy TAB. >> > camview seems to be made to be a 3rd window tab in the center, backplot > window of axis. For that, camview works well albeit slow. I'll go plug > one into tne toy mill which is still configured for the just barely > working teeny one I started with, BRB. > > Humm, I uncommented the lines in the .ini file that did make it work, > without unplugging the damaged camera that was still making normal video > of the stuff on the table behind the keyboard, but something in the > system is now killing it and linuxcnc won't start. > > Perhaps its time to go get the latest from Nic's .ru site? > There's probably been a gigabyte of updates to both LCNC and the system > since I last had it running. The web page download is however 3 years > old, so maybe not. Maybe Nic doesn't its died? > > And I am likely a good 90-120 days with the next project here before I > can come back to this. There is about $1000 worth of Mahogany in the > way in the garage right now that needs to be carved up & made into 3 > more cedar lined blanket chests. > > Cheers, Gene Heskett Gene,
How about a pic of one of those blanket chests? Jim ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users