Good morning Guys, Just polishing up my build, and noticed a problem late Friday, I was randomly noticing some weird things happening in regards to my ladder logic, and looked at every thing regarding the ladder logic, even re-writing multiple rungs to see if maybe I had a programming error. What I found is, is my servo_thread is set at 2,500,000 ns and my ladder is peaking at 3,400,000 to 3,500,000 ns. So do I just make my servo_thread bigger, or add another "ladder_thread", just for my ladder program, then chisel down the servo_thread to what it needs to function properly?
-- Thanks Rick Lair Superior Roll & Turning LLC 399 East Center Street Petersburg MI, 49270 PH: 734-279-1831 FAX: 734-279-1166 www.superiorroll.com ------------------------------------------------------------------------------ Presto, an open source distributed SQL query engine for big data, initially developed by Facebook, enables you to easily query your data on Hadoop in a more interactive manner. Teradata is also now providing full enterprise support for Presto. Download a free open source copy now. http://pubads.g.doubleclick.net/gampad/clk?id=250295911&iu=/4140 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
