>>I currently use a MAX485. So no special hardware like Siemens RS232 to Profibus adapters. That's good.
>>Yes, you could do that. Or write the program in AWL to begin with. :) I've written and debugged my fair share of AWL... but I can program logic a lot faster in LAD. I don't get hung up on the details as much with LAD. Plus I have yet to see an electrician in the USA that understands AWL. The techs is Germany used to be trained on it as a normal part of their training. The "standard PLC programming" here used to be Allen Bradley SLC 500 Ladder Logic. But that has changed over the last 20 years. The introduction of the IEC programming standards has helped a lot. Dave On 5/21/2016 2:32 PM, Michael Büsch wrote: > On Tue, 17 May 2016 15:42:32 -0400 > Dave Cole <linuxcncro...@gmail.com> wrote: > >> I downloaded the Windows version of awlsim. >> >> Its very impressive. Regarding the Profibus interface; Are you >> using a RS232/ RS485 converter to connect to the Profibus I/O block? >> Is the methods of configuring a Profibus drop documented some where? > > I currently use a MAX485. > > There's almost no real Profibus documentation available for free. So > it's hard to get some information. But if you search hard enough, > you'll eventually find something. > > >> I do Step7 programming but mostly in Lad/Ladder. I haven't tried it >> yet, but it appears that I could write a program in Step7, compile it >> and check it for errors and then export the source to your AWLSIM >> program and control Profibus I/O from a Raspberry PI, PC, etc ! Very >> nice! > Yes, you could do that. Or write the program in AWL to begin with. :) > ------------------------------------------------------------------------------ Mobile security can be enabling, not merely restricting. Employees who bring their own devices (BYOD) to work are irked by the imposition of MDM restrictions. Mobile Device Manager Plus allows you to control only the apps on BYO-devices by containerizing them, leaving personal data untouched! https://ad.doubleclick.net/ddm/clk/304595813;131938128;j _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users