Good Morning Andy, This operation is done on different machines on the other side of the shop for the most part, all of which still have the original Cincinnati Milacron control on them. I have seen on a rare occasion them do this on the LCNC turning centers, but not all that often.
Are you thinking of a new component then? Rick On 05/25/2016 09:26 AM, andy pugh wrote: > On 25 May 2016 at 14:13, Rick Lair <r...@superiorroll.com> wrote: >> As for the actual topic, I see our guys constantly fiddling with the >> spindle speed override potentiometer, up/down/up/down when re-cutting >> the hardened D-2 rolls that we re-condition, > This sounds like my idea of deliberately applying a dither to the > speed command via HAL. > > Have you considered asking them if they would like that facility? > -- Thanks Rick Lair Superior Roll & Turning LLC 399 East Center Street Petersburg MI, 49270 PH: 734-279-1831 FAX: 734-279-1166 www.superiorroll.com ------------------------------------------------------------------------------ Mobile security can be enabling, not merely restricting. Employees who bring their own devices (BYOD) to work are irked by the imposition of MDM restrictions. Mobile Device Manager Plus allows you to control only the apps on BYO-devices by containerizing them, leaving personal data untouched! https://ad.doubleclick.net/ddm/clk/304595813;131938128;j _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
