On 25 May 2016 at 16:03, andy pugh <bodge...@gmail.com> wrote: > On 25 May 2016 at 14:32, Rick Lair <r...@superiorroll.com> wrote: > > > Are you thinking of a new component then? > > There is no need for a new component, it could be easily done with siggen: > http://linuxcnc.org/docs/2.7/html/man/man9/siggen.9.html > Wire the spindle speed request into the "offset" pin and run the > spindle control from the output, enable and alter the dither amplitude > from a slider in PyVCP (or even enable a fixed amplitude with the mist > checkbox, for example). > > -- > > I Don't know if you thought of it yourself, but Haas do do that on their lathes;
https://www.youtube.com/watch?v=dXR2wDDFFm4 ------------------------------------------------------------------------------ Mobile security can be enabling, not merely restricting. Employees who bring their own devices (BYOD) to work are irked by the imposition of MDM restrictions. Mobile Device Manager Plus allows you to control only the apps on BYO-devices by containerizing them, leaving personal data untouched! https://ad.doubleclick.net/ddm/clk/304595813;131938128;j _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
