On Fri, 3 Feb 2017, Andrew wrote: > Date: Fri, 3 Feb 2017 22:23:52 +0200 > From: Andrew <pkm...@gmail.com> > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Subject: Re: [Emc-users] 6I24 PCI or 7I80 Ethernet? > > 2017-01-14 17:20 GMT+02:00 John Thornton <j...@gnipsel.com>: > >> The cool thing about the 5/5i24 is you can connect an Opto 22 base to >> one port and have a lot of I/O. >> > > I encountered a 30-year-old machine with two opto22 boards (24 channels > each, IDC50 connectors) and 3 steppers. > So I'm thinking 7i80HD. Should it work as is with the opto22 boards? > > Thanks, > Andrew > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users >
Yes, you can use OPTO22 racks with any of our 50 pin FPGA cards (except the 4I68 since its I/O is not 5V tolerant). If you have a lot of OPTO 22 racks, a 7I90HD can be used as a sserial remote and drive 3x 24 I/O racks Peter Wallace Mesa Electronics ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
