On 03/01/2017 10:16 PM, Gene Heskett wrote: > On Wednesday 01 March 2017 22:31:31 Jon Elson wrote: > > I also have a button that has to be held to enable jogging, > so there will be no jitter (or movement at all) when that > button is not being pressed. That saves me from accidents > when I bump the MPG dial. > > Jon > > That is a concern here too, but would need another run of cat5 jumper > cable to do. I may, in the halfile, put an activity timeout of say 5 > seconds of allowable activity after the range switch was toggled off, > and I am leaning toward ditching the pushbutton for a spring loaded to > off toggle/bat handle type. The button connects the wiper of the axis selector switch. So, if the button is not pushed, it selects no axis, thus the MPG is ignored. You shouldn't need an extra wire to do that.
Jon ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users