On Tuesday 06 June 2017 11:46:27 Bertho Stultiens wrote: > On 06/06/2017 03:30 AM, Gene Heskett wrote: > > Does the image I downloaded Saturday and wrote to an sd card > > yesterday have this stuff in it? > > No, you need to pull the most recent source-files (hm2_rpspi.c and > spi_common_rpspi.h) from the mailing list (or the forum). > > Login as pi user and put them in > ~/linuxcnc-git/src/hal/drivers/mesa-hostmot2/ > > Then do: > $ cd ~/linuxcnc-git/src > $ make I am ready to do the make. I've crashed it at least a dozen times so far today, but we'll see if it can actually get thru a make. Did, building only the hm2_rpspi.so
> $ sudo make setuid did this too. Now print this so I don't have any typo's when I goto the machine for the test run. > $ ../scripts/linuxcnc -v > ../../linuxcnc/configs/sheldon-lathe/7i90-axis.ini > > That should run your sheldon lathe config. You may need to update the > config as needed. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users