On 18 October 2017 at 18:03, Martin Dobbins <tu...@hotmail.com> wrote:
> Drive > http://www.newegg.com/Product/Product.aspx?Item=N82E16820721106 I have found these more than adequate for a CNC machine. G-code files are small: http://www.ebay.co.uk/itm/Industrial-Disk-on-Module-Kingspec-SATA-SLC-DOM-7Pins-8GB-SLC-1CH-/262850750707 Plug directly into the SATA socket. (though they also need 5V from somwhere else on the motherboard) > Case > http://www.mini-box.com/M350-universal-mini-itx-enclosure And I typically don't bother with a case, just put the MB in with all the other electronics. > Power Supply > http://www.mini-box.com/picoPSU-90 Alternatively some motherboards run from 12V directly. (And there are some that run on 24V happily too) -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1916 ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
