On 11.05.18 07:42, Gene Heskett wrote: > On Friday 11 May 2018 03:32:39 Erik Christiansen wrote: > A box or three of grubscrews off fleabay won't add up > > to much cost. The last boxful I bought was M3 to M10, IIRC. You might > > do better buying plastic bags of each size, for quantity. > > > Thats what I'm going to do, something with a bit of length so an allen or > bristol wrench has a decent chance of driving it well. I just need to > get off my duff and get a few boxes ordered. 100 count boxes.
Errrr, vertical hold is slipping now. AIUI, you're putting the tap hat into an R8 collet, so the grubscrews can't be longer than the wall of the tap hat. Mebbe that just means you're going for a significantly bigger collet to give room for the longer grubscrews. I think I have picture lock again. I'll have to do that too when I get the bigger sizes done. ... > I'm not that high either, 1000-1100' maybe. The "mountain" our old ntsc > transmitter is on since 1955 or so, is called Fisher Hill, 1620 feet at > the base of a 509' tower and antenna. Costs more to take it down than > its worth as salvage, so they are keeping the lights on. I'm the light > watcher/failure reporter as I can see it from my place. :) Sounds like Entropy is the feller who'll bring it down. (Doesn't charge much, but leaves ya with the clean-up.) Seems like you're out of range when it happens. That's kinda handy. Erik ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users