On Tuesday 24 July 2018 05:09:24 Tim Morley wrote: > On 07/24/2018 12:17 AM, John Dammeyer wrote: > > So what OS and CAD/CAM software are users of LinuxCNC working with? > > I've been using CamBam (http://www.cambam.co.uk/) as a simple cad and > cam system. It seems to work nicely on both windows and linux. > > Tim
Might be helpfull, but at $149 USD, is way above my pay grade. I'd much rather buy hardware with that kind of SS income. I need a better A axis for starters. That $100 4" table from Grizzly/India is mechanically a P.O.S. even with a motor on it. > ---------------------------------------------------------------------- >-------- Check out the vibrant tech community on one of the world's > most engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users -- Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
