On 22 August 2018 at 16:09, Condit Alan via Emc-users <[email protected]> wrote: > I tried to use pncconf to configure linuxcnc to use a 5i25 with a single 7i76 > (Board Name: 5i25-Internal Data and Firmware: 7i76x2 with 1 7i76). I chose to > setup the "7i76-Analog Output" on tab TB4 and selected “Spindle Output” from > the pull down list. When I invoke linuxcnc with that config, Linuxcnc > terminates reporting a missing pin hm2_5i25.0.7i76.0.0.spinout-minlim.
Maybe re-select that option and comment out the minlim line, it will default to zero anyway. (or work out what the pin is really called) Unless the problem really is that you have not connected field power on the 7i76. (in which case none of the smart-serial devices will show up) -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1916 ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
